Address: Yizheng Automotive Industrial Park, Jiangsu
No. 878 Roewe Road
(No. 18 Tian Yue Boulevard)
Cell phone: Zheng Minghui 13705253816
Xu Qing 13905256605
Xu Xiangdong 13852771586
Web site: www.yoheat.com
First of all, you can tell you clearly that the fins of the fin tube are not the better, the better the finer is, of course. The specific reasons are as follows:
1. when the fin heat transfer area of the fin tube becomes larger, the corresponding heat transfer coefficient can not be increased. It will be discounted, and the higher the fin tube's fin, the discount value will increase. This makes it clear that the higher the fin, the work efficiency of the fin is reduced.
2. if the fin of the fin tube is too high or too dense, it will easily produce the problem of ash accumulation, and it is difficult to clear the ash.
3. and the fin fin tube is too dense, the difficulty will increase the processing process, thus greatly improve the cost.
The above is why the fin tube fin more or more high, but the use of the effect does not increase to reduce the reason, hope to help you.